Catalyst Monitor Not Ready: What the Status Means

A catalyst monitor marked not ready means its onboard self-test has not completed for the displayed reporting period. It does not say that the converter has failed. A not supported response is a separate applicability state. A code such as P0420 is yet another piece of evidence: it is a reported catalyst-system-efficiency code for Bank 1, but it does not identify a failed component by itself. Read the readiness screen and DTC report separately.

OBD CAN team · Updated

Compare Catalyst and Heated Catalyst line by line

OBD CAN’s Monitor Status report lists supported monitors according to responses from the vehicle. On that screen, Catalyst and Heated catalyst are separate rows. Check support and readiness on each row instead of treating the word “catalyst” as one combined result. A vehicle that does not support a heated-catalyst monitor may still report the ordinary Catalyst monitor.

Readiness reports whether the vehicle’s monitor ran for that period. Ready means its onboard test completed; not ready means no completed readiness result is available yet; not supported means this response does not report the test as applicable. A ready status is not a physical inspection of the converter and is not an inspection pass. Manufacturer enabling conditions vary, so do not apply a generic drive cycle or a universal number of trips.

Use the monitor report for readiness evidence

  1. Park and connect a compatible BLE OBD2 adapter. Sign in to OBD CAN, open Monitor Status, and start or refresh the read. This feature requires paid membership as well as sign-in and a compatible adapter.
  2. Read the exact Monitor status since DTCs cleared and Monitor status this drive cycle cards. Record Catalyst and Heated catalyst support/readiness separately in each period.
  3. Keep the counters (distance with MIL on, warm-ups since codes were cleared, and distance since clearing) with their labels and units. The ECU supplies these values when supported. They provide context; they do not predict a completion deadline.
  4. Read the DTC page separately and save any confirmed, pending and permanent codes. If P0420 appears, note its exact category and preserve the freeze frame if your scan tool makes it available.

The Monitor Status screen is useful for the monitor state. The DTC screen is where the fault code appears. Neither report proves that a converter itself is the only possible cause. Follow the applicable manufacturer diagnostic procedure before choosing a test or part.

Example: the App’s monitor rows and period labels

OBD CAN Monitor Status with Catalyst not ready, EVAP ready in both periods, and Heated catalyst unsupported
OBD CAN Monitor Status · English App interface with example data. The separate DTC report appears below.
  1. Catalyst: supported and not ready in both the since-clear and current-cycle panels of this example.
  2. Heated catalyst: not supported; it remains independent of the ordinary Catalyst row.
  3. EVAP: ready in both since-clear and current-cycle panels of this example.
  4. MIL distance, warm-ups and distance since clearing appear above the two status panels.

With results displayed, tap ⋮ More Options, then select Copy AI Prompt Template. The copied Monitor Status report contains the data returned for this screen and three built-in questions about readiness and counters. Those are general Monitor Status prompts, not a Catalyst-specific prompt. The following image is a second report type and an independent saved-report example; it is not a combined scan of the same data.

# OBD2 Monitor Status

Distance traveled with MIL on: 0 km

Warm-ups since codes cleared: 3 count

Distance traveled since codes cleared: 128 km

## Monitor status since DTCs cleared
- Mode: Since DTC cleared
- MIL: Off
- DTC count: 0
- Engine type: Spark Ignition (SI)
- Catalyst: ✗ Not ready
- Heated catalyst: Not supported
- Evaporative system: ✓ Ready

## Monitor status this drive cycle
- Mode: Current drive cycle
- MIL: Off
- DTC count: 0
- Engine type: Spark Ignition (SI)
- Catalyst: ✗ Not ready
- Heated catalyst: Not supported
- Evaporative system: ✓ Ready

---

Based on the OBD2 monitor status data above, please analyze:
1. Are the readiness statuses of each monitoring system normal? What do the not-ready and not-supported items mean?
2. What do the MIL distance, distance since codes cleared, and warm-up count indicate?
3. Based on all the monitor status data, can this vehicle pass the emissions inspection? What should I be aware of?

Download the exact English Monitor Status report and its questions. If you want the AI to compare a Catalyst status with another finding, add that question yourself after pasting the report. Learn how the OBD CAN report-to-AI workflow works.

Keep P0420 in the DTC report

P0420 means Catalyst System Efficiency Below Threshold, Bank 1 in the cited Ford OBD service material. That code meaning describes what the control system reported. It does not say “replace the converter.” Vehicle-specific diagnosis determines which additional checks apply.

Historical OBD CAN DTC report with P0420 in the permanent category
OBD CAN interface demonstration · example data · English app interface. Separate saved-report preview: P0420 appears in the permanent category. It is not the Catalyst monitor screenshot above or a real repair record.
  1. Confirmed and pending categories are empty in this report.
  2. P0420 is listed as permanent, a different DTC status category.
  3. The code does not identify the failed part or establish that a repair is complete.

For a DTC page with a code or an eligible saved historical report, tap ⋮ More Options, then select Copy AI Prompt Template. The copied report includes general DTC questions. You can add your own question, such as “How does this stored code relate to my separate Catalyst readiness report?” The code excerpt below is the app’s actual English clipboard output for the displayed report.

# 🚗 OBD2 Vehicle Diagnostic Report

## Confirmed DTCs — 0
None

## Pending DTCs — 0
None

## Permanent DTCs — 1
P0420

---

Based on the above OBD2 diagnostic report, please help me analyze:
1. What does each fault code mean and what are the possible causes?
2. Which faults are the most urgent and need immediate attention?
3. Are there any relationships or correlations between these fault codes?
4. What are the recommended repair solutions and estimated costs?
5. Do these faults affect driving safety? Can I continue driving?

Download the exact English DTC report and built-in questions.

Choose the next step from both kinds of evidence

Monitor evidenceDTC and symptomsUseful next step
Catalyst supported, not readyNo catalyst code reported and no urgent symptom notedKeep the status and read period. Look up the exact vehicle’s enabling conditions and rescan when safe; do not conclude either pass or failure.
Catalyst readyNo P0420 in the DTC categoriesThis means the onboard monitor completed for that period; it does not certify the converter or guarantee an inspection outcome.
Any Catalyst statusP0420 appears as confirmed, pending or permanentSave its exact category and any available freeze frame. Use the vehicle maker’s diagnostic procedure or a qualified emissions technician; do not choose a part from the code label alone.
Heated catalyst unsupported; Catalyst supportedSeparate codes may or may not be reportedKeep the rows separate. The unsupported heated-system result does not change the ordinary Catalyst status.

For a California Smog Check example, the Bureau of Automotive Repair’s reference lists vehicle-specific readiness exceptions; California rules are not a nationwide pass/fail table. In every jurisdiction, check the local program rather than treating one ready monitor or one App screen as an official result.

Primary references and scope

Use Monitor Status to read the App’s monitor fields and OBD2 diagnostics to learn the DTC categories. For the EVAP branch of readiness, see EVAP Monitor Not Ready.

Download OBD CAN