FAQ

Find answers about connection, diagnostics, live data, records and membership.

Connection & Setup

How do I correctly connect the Bluetooth OBD scanner?
Park safely, plug a compatible BLE adapter into the OBD port, and switch on the ignition as described in your vehicle manual. Turn on Bluetooth and allow the app to use it, then search for and select the adapter in the app to connect. You usually do not need to pair it first in system Bluetooth settings.
Do I need to pair the adapter in system Bluetooth settings?
Compatible BLE adapters usually connect directly from this app. Turn on Bluetooth and allow this app to use it, then search for and select your BLE adapter in the app to connect. You usually do not need to pair it first in system Bluetooth settings.
What if the app says "Connection Failed" or cannot find the Bluetooth device?
Please check: 1. Is the OBD device indicator light on? 2. Is your phone's Bluetooth enabled and not occupied by other apps? 3. Is the vehicle ignition in the ON position? If necessary, replug the device and restart the App.
Why can't I find my OBD Bluetooth device?
This app ONLY supports Bluetooth Low Energy (BLE) protocol OBD devices (like ELM327 BLE or vgate iCar Pro BLE). Please ensure your OBD device is the BLE version. If your device is Classic Bluetooth or Wi-Fi, the app will not be able to find and connect to it.
Should I use Auto or choose a protocol?
Use Auto unless you know which protocol your vehicle requires. A manual selection is a setting, not proof that the vehicle supports it. In Auto, the detail line shows the detected protocol; -- means it is not yet known.
Why does the app keep reconnecting after the adapter turns off?
An unexpected disconnect can trigger automatic reconnection to the remembered adapter. Check its power and Bluetooth. Cancel reconnection stops the attempts; you can then reconnect manually or choose Change device. Missing readings during disconnection are not zero values.

Vehicle Diagnostics

What is UDS specific diagnosis? How is it different from standard OBD2?
Standard OBD2 mainly covers the engine and emission systems (legally mandated); while UDS (Unified Diagnostic Services) dives into manufacturer specific protocols to read deep fault codes from dozens of ECUs such as ABS, Airbags, Transmission, Body Control Module, etc.
The warning light on my dashboard is on, why can't I scan any fault codes?
If it's a non-emission related fault (like ABS or Airbag), standard OBD2 diagnostic might not read it. It is recommended to enter "UDS Specific Diagnosis", select your car brand, and perform a full system deep scan.
What does Full Vehicle Scan cover, and what does a partial report mean?
It combines supported OBD vehicle information, fault codes, monitor results and live parameters. It does not replace manufacturer-specific UDS module diagnosis. An interrupted report contains only the sections already read. Reconnect and run a new scan for fresh results; no codes or missing data do not prove the whole vehicle is fault-free.
Why does clearing codes show unconfirmed or not executed?
In UDS diagnosis, unconfirmed means the app did not receive a reliable confirmation of clearing. If communication becomes uncertain, remaining modules may be left unexecuted. Sending a command or clearing the screen is not verification; read the codes again after the connection is stable. Clearing codes does not repair the cause.
If the "OBD Annual Precheck" passes, does it mean I will pass the official emission test?
The precheck reads your Readiness Monitors and emission fault status based on OBD regulations. Passing it means the vehicle's OBD self-check is qualified, greatly improving the chances of passing the tailpipe test, but it cannot replace actual tailpipe sniffer tests.
What are "Mode 5 (O2 Sensor)" and "Mode 6 (On-Board Monitor)" tests?
These are advanced diagnostic modes. Mode 5 is used to view specific voltages and response times of O2 sensors to evaluate catalytic converter aging; Mode 6 is used to view "hidden or intermittent" system monitor data (like per-cylinder misfire counts) that haven't triggered the check engine light.

Live Data & Tests

Why do some dashboard gauges show -- or unsupported?
You can configure gauges before connecting, but the app must check which parameters the connected vehicle supports. Offline, unverified, failed and unsupported readings are not real measurements. Reconnect and let the support check finish, or choose another supported parameter.
What does Battery Test measure, and how do I start?
Follow the page prompts with the vehicle safely parked and the engine initially stopped. The test observes system voltage before starting, the drop during cranking and recovery afterward. It is not a direct measurement of battery capacity or an EV traction-battery health test.
Why can’t the oxygen-sensor waveform test start or give a result?
The test checks fuel-system closed-loop status and compatible oxygen-sensor data. Follow the warm-up prompts. A vehicle may lack the front/rear sensor data this test needs even if other live data works. Too few samples or an interrupted run cannot establish a result.
Why did the "Acceleration Test" stop before reaching 100km/h?
You might have selected "Speed drops only" in the settings. If you release the throttle slightly during acceleration, causing a speed drop (e.g., during gear shifts), the system will determine that the acceleration process has ended.
How to ensure accurate results for "In-car Noise Health Analysis"?
Before testing, be sure to close windows, turn off car audio, AC and heater. Conduct the test on a flat road during stationary idle and different speed ranges. The system will automatically isolate ambient noise and give an objective health rating.
Is "Fuel Consumption" data accurate? How to set parameters?
Fuel consumption is calculated based on Mass Air Flow (MAF) or Manifold Absolute Pressure (MAP) combined with engine displacement. Please accurately enter your vehicle's Engine Displacement and Volumetric Efficiency (VE) in the fuel settings (NA cars are usually 85%, Turbos >100%) for the most accurate readings.

Extended & Custom Parameters

How do I add or import extended parameters?
Use the parameter catalog, manual entry or CSV import to add definitions to My Parameters. Review the ECU address, request, formula and unit before reading. Duplicate imports can be skipped or added as copies; existing definitions are not overwritten automatically. Catalog entries do not guarantee compatibility with your vehicle.
Can custom parameters code or control the vehicle?
The extended-parameter tool reads defined parameters. It accepts only its supported read-only request subset and rejects requests outside that scope. It is not an ECU flashing, coding or actuator-control tool. A rejected definition cannot be made supported simply by changing its label.
Why can I read engine RPM but not some extended parameters?
Extended parameters may need a specific ECU address or a longer response. Some ELM327-compatible adapters read basic data but lose data or fail with these requests. Availability also depends on the model, year, powertrain and ECU version; catalog entries are reference configurations, not a compatibility guarantee. Check the parameter settings, close other apps using the adapter, and retry with the vehicle safely parked and powered as required. If failures persist, compare with another reliable compatible adapter.
What does an incomplete response with required data received mean?
Not all response data arrived, but the app could reliably locate every byte needed by this parameter's formula. It can show the value with an incomplete-response label, also retained in capture reports and CSV exports. Missing bytes are never filled with zeros or previous readings. If required bytes are missing or their positions are uncertain, the read still fails. This label does not verify that the parameter definition is suitable for your vehicle.
How should I choose an adapter for extended vehicle data?
This app requires a Bluetooth Low Energy (BLE) adapter. Choose a product with clear protocol specifications and support or firmware updates. An ELM327 V1.5/V2.1 label, chip model or case design alone does not guarantee compatibility. For extended parameters, check multi-frame response and custom ECU address support, not just basic RPM or speed readings. Compatibility cannot be judged by price or place of manufacture alone.

Records, Reports & Export

Why can’t I start recording every selected sensor?
Sensor recording first needs a complete vehicle-support check and at least one supported selected parameter. Unsupported selections are excluded after confirmation. Choose a duration and sampling settings, then start while connected. Signing in and the required feature access may be needed.
Can sensor recording continue in the background or after disconnection?
Sensor recording runs in the foreground. Backgrounding the app, losing the connection or switching sessions can end it as interrupted. Review the samples already saved in history; an interrupted record is not a completed run and does not fill in missing samples. Start a new record when ready.
Can I view reports offline, and will they appear on a new phone?
Saved diagnostic reports open their recorded data without querying the vehicle again. Reports and recording histories are stored locally and separated by user account. Membership access does not mean these files automatically sync to a new phone. Export important records before changing devices or removing app data.
How do I export sensor, fuel or extended-parameter records?
Open the relevant record or report and use its CSV export action, then choose a destination in the system share sheet. Available export formats differ by page. Exporting My Parameters saves parameter definitions, not captured measurements; export the capture report when you need measured data.
What should I provide when reporting a connection or reading problem?
Include the vehicle model/year, adapter model, steps and the message shown. If logs are needed, enable diagnostic logging in Settings, reproduce the problem, then export or share the log package. Logs help investigate communication; they are separate from sensor CSV recordings and saved diagnostic reports.

Account & Membership

What is the difference between Basic and Premium features?
Standard OBD2 diagnosis and live data streams are free. Professional tools like UDS full scan, acceleration test, noise analysis, annual precheck, and deep system monitors require upgrading to Premium member to unlock.
Can I continue to use my membership if I change my phone?
Yes. As long as you log into the same App account on the new phone, your subscription status and membership privileges will automatically sync. If subscribed via Apple App Store / Google Play, you can also tap "Restore Purchase".