P0300 Random Misfire: What to Save Before Clearing Codes
P0300 means the engine computer detected random or multiple-cylinder misfires. Before clearing codes, save the report and write down what the engine and check engine light were doing when the symptom appeared. A second code such as P0302 tells you which cylinder the computer flagged. That gives a technician a more specific starting point for testing.
OBD CAN team · Updated
Let the warning light and symptoms set the priority
If the check engine light is flashing or the engine is shaking severely, pull over when it is safe and follow your vehicle’s owner’s manual or contact roadside assistance. A severe misfire can damage the catalytic converter. Collect scan data only after you have addressed the immediate situation. A steady light or a light that has gone out is insufficient to judge whether the vehicle is safe to drive.
Keep the first scan before changing anything
With the vehicle safely parked, set the ignition as instructed by your vehicle manual and connect a compatible BLE OBD2 adapter. Sign in to OBD CAN and start a read in OBD2 Diagnosis. Standard code reading is free after sign-in.
The app attempts to save results to History as it finishes the scan. Open the history icon in OBD2 Diagnosis to check that the report is there. Record each code under its actual Confirmed, Pending, or Permanent heading. If you see an interruption or communication error, preserve any available result and mark the read as incomplete. An empty category after a failed request gives you no usable result for that request.
Use More Options to save a report image or choose Copy AI Prompt Template to copy the report and the app’s prepared questions. Save the copied text with your notes if you want a plain-text record. Leave Clear DTCs alone while gathering evidence, since clearing can erase code information and reset emissions monitor readiness.
Compare two P0300 report patterns
These saved OBD CAN reports use separate sets of example data. Compare the categories to see what each scan adds to the next check.
- Confirmed contains P0300, the general misfire code.
- Pending shows no code in this report.
- Permanent also shows no code in this report.
With P0300 alone, keep the symptom timing and any other codes your scan returned. If the roughness appeared just after a cold start or only under load, note that detail for the shop. This result leaves the cylinder and cause open.
Download example A as copied from the app (English)
- Confirmed contains P0300, the general misfire code.
- Pending contains P0302, which points to cylinder 2.
- Permanent also shows no code in this report.
With a pending P0302 alongside P0300, keep both codes and their statuses. Ask the shop to check cylinder 2 using the procedure for your engine and consider the other codes and conditions you recorded. The report alone cannot identify a failed component.
Add the details a scan cannot capture
Write down the date, odometer, warning-light behavior, and when the symptom appeared. Note whether the engine had just started or was warm, whether you were idling, cruising or accelerating, and how long the symptom lasted. Include recent work or refueling if relevant. Mark details you did not observe as unknown. Bring those notes and the original report to the shop. If you already have a later scan, keep it separately so the shop can compare what changed.
Use one line per event in your notes: date and odometer / light behavior / engine temperature and driving condition / symptom and duration / corresponding scan.
If your scan tool supplies freeze-frame information, save it with the scan. Avoid recreating rough running to get more data. If you have only the light and no saved code, start with what to check when the light is on but no codes appear.
Compare a later scan from the same vehicle
When another parked scan is appropriate, save it separately without clearing codes. Compare the dates, engine conditions, and Confirmed, Pending, and Permanent categories across the two reports.
- Same cylinder code still listed? Record any change in status and whether symptoms returned. Give the technician both reports.
- New accompanying code? Keep its exact number and category alongside P0300.
- Code absent on a completed read with usable responses? Record the conditions and keep the first report. An intermittent symptom can return later.
- Read interrupted or response missing? Mark the result incomplete.
Sources
- Ford documents general and cylinder-specific misfire detection for its 2020–2023 gasoline applications. Ford OBD System Operation Summary
- GM lists P0302 as the cylinder 2 misfire code in its bulletin for the listed engines. GM bulletin 19-NA-219
- For an example of manufacturer guidance on a flashing check engine light, see the 2026 Honda Pilot owner’s manual. Follow the manual for the vehicle you are driving.